RESUMO
Enhancing the durability of structural elements is a viable approach to promote sustainability in civil engineering. Research has shown that well-maintained slabs outperform degraded ones, which deteriorate rapidly due to insufficient upkeep. The occurrence of cracking and deformation in slabs subjected to sustained loads significantly impacts their functionality. However, the implementation of appropriate retrofitting techniques utilizing locally available materials can effectively minimize deflection and crack propagation while also improving flexural capacity. This particular study aimed to evaluate the flexural performance of slabs that were retrofitted using bamboo fibre laminate (BFL). Also, the study investigated two alternative replacement methods alongside the conventional mix; one involved replacing all fine aggregates with ceramic fine aggregate and the other involved a complete replacement of coarse aggregates with ceramic coarse aggregate. These mixes were represented in both the retrofitted and non-retrofitted samples. The retrofitting process included using the combined external bonding and near surface-mounted method. Twelve slab samples were made, with six being non-retrofitted and the other six retrofitted with BFL. Each of the samples had dimensions of 300 mm × 300 mm × 50 mm for reinforced concrete (RC) slabs. The slabs were tested employing the three point-bending system, and the retrofitted slabs with the conventional mix exhibited the highest ultimate failure load and flexural strength (62.1 kN), which compared to the non-retrofitted slabs of the same mix was a 60.76% increase. Additionally, the study did a thorough analysis of the presence of flexural and diagonal shear cracks, as well as the occurrence of debonding between BFL and the slabs. Non-destructive tests were also conducted on the slab samples to further confirm accurate results. These findings offer helpful insights into the development and application of a sustainable retrofitting material that can remarkably improve RC slabs.
RESUMO
Globally, as human population and industries grow, so does the creation of agricultural, industrial, and demolition waste. When these wastes are not properly recycled, reused, or disposed of, they pose a threat to the environment. The importance of this study lies in the beneficial use of coconut fibre and mineral wool in the form of fibres in cement mortar production. This study examines the use of coconut and mineral wool fibres in the production of fibre-reinforced mortar. Five different mortar mixtures were prepared, having one control mortar along with four fibre-reinforced mortars. The control mortar is denoted as CM while 1% and 1.5% of mineral wool are incorporated into this mortar mix and denoted as RMM-1.0 and RMM-1.5, respectively. Additionally, the mortar sample configurations contain 1% and 1.5% coconut fibers, designated as RCM-1.0 and RCM-1.5. These samples were subjected to different strength and durability tests to determine their suitability for use in mortar production. The testing findings show that mortar containing 1.5% mineral wool has better compared flexural strength and durability properties. The investigation results will form part of the database for the efficient utilization of natural and waste fibres in the construction and building sectors.
